A comparative study of the use of digital technology in the anterior smile experience.

OBJECTIVES: this study aims to compare the clinical outcomes of traditional and digital crown extension guides in the aesthetic restoration of anterior teeth. Additionally, the study will analyze the differences in the results of various digital crown extension guides in anterior aesthetic restorations. METHODS: Sixty-two patients who required aesthetic restoration of their anterior teeth were selected for this study. The patients had a total of 230 anterior teeth and were randomly divided into three groups: a control group of 22 cases who received diagnostic wax-up with pressure film, an experimental group 1 of 20 cases who received 3D printed digital models with pressure film, and an experimental group 2 of 20 patients who received digital dual-positioning guides. The control group had a total of 84 anterior teeth, experimental group 1 had 72 anterior teeth, and experimental group 2 had 74 anterior teeth. The study compared three methods for fabricating crown extension guides: the control group used the diagnostic wax-up plus compression film method, while experimental group 1 used compression film on 3D printed models and experimental group 2 used 3D printed digital dual-positioning crown extension guides. After the crown lengthening surgery, the control group patients wore DMG resin temporary crown material for gingival contouring, while the experimental group patients wore 3D printed resin temporary crowns for the same purpose. The patients were followed up in the outpatient clinic after wearing temporary crowns for 1 month, 3 months, and 6 months, respectively. The clinical results were evaluated in terms of marginal fit, red aesthetic index, and white aesthetic index. RESULTS: Based on the statistical analysis, the experimental group required significantly fewer follow-up visits and less time for guide design and fabrication compared to the control group. Additionally, the surgical time for the experimental group was significantly shorter than that of the control group. During the postoperative period between the 1st and 3rd month, the PES index scores for the marginal gingival level, proximal, and distal mesiodistal gingival papillae of the experimental group showed a trend of superiority over those of the control group. By the 6th month, the marginal gingival level exhibited a significant difference between the experimental and control groups. The experimental group demonstrated superior results to the control group in terms of shape, contour, and volume of the teeth, color, surface texture, and transparency of the restorations, and features during the 1st and 3rd postoperative months. In the 6th month, the comparative results indicated that the experimental group continued to exhibit superior outcomes to the control group in terms of the shape, color, surface texture, and transparency of the restorations, as well as the characteristics of the teeth. Additionally, the experimental group demonstrated significantly fewer gingival alterations than the control group at 1 month, 3 months, and 6 months post-procedure, with this difference being statistically significant. Furthermore, the combination of 3D printing technology and restorative techniques was utilized, resulting in consistent patient satisfaction. CONCLUSION: Digitalisation plays an important role in anterior aesthetic restorations. The use of digital technology to manage the entire process of anterior cosmetic restorations can improve restorative results, reduce the number of follow-up appointments, shorten consultation time, and achieve better patient satisfaction.

Clinical application principles and new developments of zirconia crown.

Zirconia crown has been widely used in the field of prosthodontics. Traditional zirconia exhibits excellent mechanical properties but lacks translucency. The introduction of transparent zirconia significantly enhances its aesthetic performance. In clinical applications, factors affecting the aesthetic results of full zirconia crown should be comprehensively considered, and the most suitable restoration should be chosen. Additionally, clinicians need to design appropriate tooth preparation dimensions and methods based on an individual patient's actual situation. During the clinical bonding process of zirconia, proper surface treatment of the tooth and restoration is essential. The selection of suitable adhesives is crucial for achieving optimal bonding strength and aesthetics.

One case of complicated crown root fracture of upper anterior teeth managed by multidisciplinary joint approaches.

Complicated crown root fracture is a serious combined fracture of the enamel, dentin, and cementum in dental trauma. The treatment method is complicated. During the procedure, the condition of pulp, periodontal, and tooth body should be thoroughly evaluated, and a multidisciplinary approach combined with sequential treatment is recommended. This case reported the different treatment and repair processes of one case of two affected teeth after complicated crown root fracture of upper anterior teeth, including regrafting of broken crown after flap surgery at the first visit, direct resin repair to remove broken fragments, and pulp treatment and post-crown repair at the second visit. After 18 months of follow-up, the preservation treatment of the affected teeth with complicated crown root fracture was achieved. Therefore, fragment reattachment and post-crown restoration are feasible treatment options for children with complicated crown root fracture.

Quantum mechanical analysis of yttrium-stabilized zirconia and alumina: implications for mechanical performance of esthetic crowns.

BACKGROUND: Yttrium-stabilized zirconia (YSZ) and alumina are the most commonly used dental esthetic crown materials. This study aimed to provide detailed information on the comparison between yttrium-stabilized zirconia (YSZ) and alumina, the two materials most often used for esthetic crowns in dentistry. METHODOLOGY: The ground-state energy of the materials was calculated using the Cambridge Serial Total Energy Package (CASTEP) code, which employs a first-principles method based on density functional theory (DFT). The electronic exchange-correlation energy was evaluated using the generalized gradient approximation (GGA) within the Perdew (Burke) Ernzerhof scheme. RESULTS: Optimization of the geometries and investigation of the optical properties, dynamic stability, band structures, refractive indices, and mechanical properties of these materials contribute to a holistic understanding of these materials. Geometric optimization of YSZ provides important insights into its dynamic stability based on observations of its crystal structure and polyhedral geometry, which show stable configurations. Alumina exhibits a distinctive charge, kinetic, and potential (CKP) geometry, which contributes to its interesting structural framework and molecular-level stability. The optical properties of alumina were evaluated using pseudo-atomic computations, demonstrating its responsiveness to external stimuli. The refractive indices, reflectance, and dielectric functions indicate that the transmission of light by alumina depends on numerous factors that are essential for the optical performance of alumina as a material for esthetic crowns. The band structures of both the materials were explored, and the band gap of alumina was determined to be 5.853 eV. In addition, the band structure describes electronic transitions that influence the conductivity and optical properties of a material. The stability of alumina can be deduced from its bandgap, an essential property that determines its use as a dental material. Refractive indices are vital optical properties of esthetic crown materials. Therefore, the ability to understand their refractive-index graphs explains their transparency and color distortion through how the material responds to light..The regulated absorption characteristics exhibited by YSZ render it a highly attractive option for the development of esthetic crowns, as it guarantees minimal color distortion. CONCLUSION: The acceptability of materials for esthetic crowns is strongly determined by mechanical properties such as elastic stiffness constants, Young's modulus, and shear modulus. YSZ is a highly durable material for dental applications, owing to its superior mechanical strength.

Effects of polymethyl methacrylate-based bone cement graft for treating excessive gingival display and its dimensional facial changes: 12-Month clinical study.

Objective: to present a 12-month follow-up with photographic and tomographic analyses of the effect of polymethyl methacrylate-based bone cement graft (PMMA) in gingival exposure (GE) in patients with excessive gingival display (EGD). Methods: Twelve patients with EGD were included. The PMMA was surgically placed. A frontal and lateral photograph protocol was performed at baseline (T0), 3 (T3), 6 (T6), and 12 months (T12) post-operatively. Soft tissue cone-beam computed tomography (ST-CBCT) was performed at T0 and T12. Measures included GE, length of the lip vermilion (LLV), lip shape (LS), nose width (NW), filter width (FW), nasolabial angle (NAS) while smiling, and nasolabial angle at rest (NAR). The height, thickness, and volume of the cement graft were also measured in the ST-CBCT. The comparisons were performed by Kruskal-Wallis test at 5 % of significance (p < 0.05). Results: The height, thickness, and volume of the PMMA were respectively 12.84 ± 1.59 mm, 3.83 ± 0.53, and 1532.02 ± 532.52 mm3. PMMA significantly decreased GE from 8.33 ± 1.25 mm (T0) to 6.60 ± 0.93 mm (T12) (p < 0.01). NAR was 98.34 ± 9.28° at T0 and increased to 105.13 ± 7.33° at T12; however, the angle value was not statistically different (p = 0.08). LLV, LS, NW, FW, and NAS did not exhibit statistical differences between the baseline and follow-up periods. Conclusions: PMMA significantly decreased GE in a 12-month follow-up without influencing adjacent soft tissue anatomical structures.

Population Genetic Analyses and Trichothecene Genotype Profiling of Fusarium pseudograminearum Causing Wheat Crown Rot in Henan, China.

In China, Fusarium pseudograminearum has emerged as a major pathogen causing Fusarium crown rot (FCR) and caused significant losses. Studies on the pathogen's properties, especially its mating type and trichothecene chemotypes, are critical with respect to disease epidemiology and food/feed safety. There are currently few available reports on these issues. This study investigated the species composition, mating type idiomorphs, and trichothecene genotypes of Fusarium spp. causing FCR in Henan, China. A significant shift in F. pseudograminearum-induced FCR was found in the present study. Of the 144 purified strains, 143 were F. pseudograminearum, whereas only 1 Fusarium graminearum was identified. Moreover, a significant trichothecene-producing capability of F. pseudograminearum strains from Henan was observed in this work. Among the 143 F. pseudograminearum strains identified, F. pseudograminearum with a 15ADON genotype was found to be predominant (133 isolates), accounting for 92.36% of all strains, followed by F. pseudograminearum with a 3ADON genotype, whereas only one NIV genotype strain was detected. Overall, a relatively well-balanced 1:1 ratio of the F. pseudograminearum population was found in Henan. To the best of our knowledge, this is the first study that has examined the Fusarium populations responsible for FCR across the Henan wheat-growing region.

Genomics Analysis Reveals the Potential Biocontrol Mechanism of Pseudomonas aeruginosa QY43 against Fusarium pseudograminearum.

Fusarium crown rot (FCR) in wheat is a prevalent soil-borne disease worldwide and poses a significant threat to the production of wheat (Triticum aestivum) in China, with F. pseudograminearum being the dominant pathogen. Currently, there is a shortage of biocontrol resources to control FCR induced by F. pseudograminearum, along with biocontrol mechanisms. In this study, we have identified 37 strains of biocontrol bacteria displaying antagonistic effects against F. pseudograminearum from over 8000 single colonies isolated from soil samples with a high incidence of FCR. Among them, QY43 exhibited remarkable efficacy in controlling FCR. Further analysis identified the isolate QY43 as Pseudomonas aeruginosa, based on its colony morphology and molecular biology. In vitro, QY43 significantly inhibited the growth, conidial germination, and the pathogenicity of F. pseudograminearum. In addition, QY43 exhibited a broad spectrum of antagonistic activities against several plant pathogens. The genomics analysis revealed that there are genes encoding potential biocontrol factors in the genome of QY43. The experimental results confirmed that QY43 secretes biocontrol factor siderophores and pyocyanin. In summary, QY43 exhibits a broad spectrum of antagonistic activities and the capacity to produce diverse biocontrol factors, thereby showing substantial potential for biocontrol applications to plant disease.

Single missing molar with wide mesiodistal length restored using a single or double implant-supported crown: A self-controlled case report and 3D finite element analysis.

PURPOSE: Based on a self-controlled case, this study evaluated the finite element analysis (FEA) results of a single missing molar with wide mesiodistal length (MDL) restored by a single or double implant-supported crown. METHODS: A case of a missing bilateral mandibular first molar with wide MDL was restored using a single or double implant-supported crown. The implant survival and peri-implant bone were compared. FEA was conducted in coordination with the case using eight models with different MDLs (12, 13, 14, and 15 mm). Von Mises stress was calculated in the FEA to evaluate the biomechanical responses of the implants under increasing vertical and lateral loading, including the stress values of the implant, abutment, screw, crown, and cortical bone. RESULTS: The restorations on the left and right sides supported by double implants have been used for 6 and 12 years, respectively, and so far have shown excellent osseointegration radiographically.The von Mises stress calculated in the FEA showed that when the MDL was >14 mm, both the bone and prosthetic components bore more stress in the single implant-supported strategy. The strength was 188.62-201.37 MPa and 201.85-215.9 MPa when the MDL was 14 mm and 15 mm, respectively, which significantly exceeded the allowable yield stress (180 MPa). CONCLUSIONS: Compared with the single implant-supported crown, the double implant-supported crown reduced peri-implant bone stress and produced a more appropriate stress transfer model at the implant-bone interface when the MDL of the single missing molar was ≥14 mm.

Metal Marvels: Revolutionizing Endodontic Restoration With a Novel Endocrown Approach.

This case report explores the innovative application of the endocrown technique for restoring a severely damaged mandibular molar (tooth #46) in a 28-year-old male patient. With a recent root canal treatment history, the patient presented with a dislodged prosthesis. Due to financial constraints, a base metal alloy was chosen for the endocrown restoration. The unique preparation process involved reducing the occlusal surface by 2 mm, creating a shoulder cervical margin, and preserving enamel walls. The endocrown, crafted from a base metal alloy, demonstrated a semi-conservative approach, providing cost-effectiveness and minimal tooth preparation. The case adheres to the 2013 CAse REport (CARE) guidelines. The discussion highlights the biomechanical benefits of the endocrown, emphasizing stress resistance, stability, and superior performance compared to traditional treatments. Materials like ceramic, resin nanoceramic, and polyetheretherketone are briefly discussed, focusing on the promising success rates of endocrowns, mainly through computer-aided designing/computer-aided manufacturing systems. The report provides valuable insights for clinicians considering this endocrown technique in reconstructing severely damaged molars and premolars.

Digitally planned surgical crown lengthening: a novel bone reduction strategy to correct a gummy smile.

This report describes the bone reduction guide which was digitally obtained to improve diagnosis, treatment outcome and follow-up. Treatment of gingival smiles due to altered passive eruption should include interdisciplinary planning and smile design to facilitate the prediction of treatment outcome. Crown lengthening surgery can be supported by digital tools to improve surgical planning and follow-up. A 30-year-old female patient was referred to a private dental clinic seeking solutions for her gingival smile. Based on the anatomical crown length, a smile design was created, and the patient was presented with a simulated smile before treatment. In the surgical phase, a full-thickness flap was raised in the upper jaw to achieve the desired outcome. Using cone-beam computed tomography to determine cementoenamel junction for smile design and treatment planning brings many benefits. Patients and clinicians can foresee treatment results. From there, appropriate changes can be made. The bone reduction guide is designed to rest on the bone to help the clinician cut the bone accurately and thoroughly follow the established plan.

Haptics in fixed prosthodontics and their role in dental education: A literature review.

Technological progress leads to new advances in dental education. One of the applications involves the use of virtual and augmented reality as educational aids. The emerging question is to establish if and how these enhancements may prove beneficial to the overall student learning process. A review of recent literature was conducted with the aim of providing evidence for the development of relevant clinical guidelines. The proposed topic attempted to provide answers to the questions of (a) how participants perform when using haptic devices compared to traditional tooth preparation methods on typodonts, (b) how the use of simulators is perceived by both students and educators, and (c) what added value simulators may have in prosthetic dentistry training. The main findings of this study showed that participants expressed satisfaction with the educational experience, finding it both stimulating and very similar to the actual clinical environment. However, differences between haptic and conventional methods were also apparent. Haptics was a significant predictor of clinical crown performance. Significantly better results and shorter preparation times tended to increase with experience. In conclusion, self-directed learning appears to be beneficial in the clinical education that follows data-driven approach. At the pre-laboratory level, simulators may act as an initial familiarization instrument. At the preclinical level, they may aid in detecting students who require extra assistance, or to provide extra training hours for students lacking adequate competency to enter the clinical training phase.

Crown-Assisted CsCu2I3 Growth and Trap Passivation for Perovskite Light-Emitting Diodes.

Copper (Cu)-based perovskites are promising for lead-free perovskite light-emitting diodes (PeLEDs). However, it remains a significant challenge to achieve high performance devices due to the nonradiative loss caused by the disordered crystallization and lack of passivation. Crown ethers are known to form host-guest complexes by the interaction between C-O-C groups and certain cations, and 18-crown-6 (18C6) with an appropriate complementary size can interact with Cs+ and Cu+ cations. Herein, we studied the interaction between CsCu2I3 and two crowns with the same cyclic size, 18C6 and dibenzo-18-crown-6 (D18C6). Particularly, D18C6 can reduce the nonradiative recombination rate of CsCu2I3 film by passivating the defects and optimizing the film morphology effectively. The room mean square (RMS) decreased from 5.06 to 2.95 nm, and the PLQY was promoted from 4.71% to 19.9%. Besides, D18C6 can also decrease the barrier of hole injection. The PeLEDs based on D18C6-modified CsCu2I3 realized noticeable improvement with a maximum luminance and EQE of 583 cd/m2 and 0.662%, respectively.

Performance of posterior third-generation monolithic zirconia crowns in a complete digital workflow: A three-year prospective clinical study.

Background/purpose: Translucent monolithic zirconia restorations have recently introduced. The purpose of this study was to evaluate the clinical behavior and the survival rate of the posterior third-generation monolithic zirconia crowns (MZCs) during three years of clinical service. Materials and methods: Twenty-four patients who needed thirty crowns were enrolled in this study. Digital impressions were made, and the crowns were milled and cemented with a resin cement. The crowns outcomes were assessed using the California Dental Association's (CDA) criteria. Gingival index (GI), plaque index (PI), and periodontal probing depth (PPD) for MZCs and contralateral natural teeth (control) were assessed. Margin index (MI) for MZCs was also assessed. Data analysis was conducted using the Wilcoxon signed-rank and the Friedman tests. Results: The 3-year survival rate was 100%. All MZCs were rated as satisfactory throughout the follow-up period, and no biological or mechanical complications were observed. No differences were recorded when GI, PI and PPD at 3-year of follow-up were compared to baseline. No differences were recorded between crowned and control teeth. The MI remained stable throughout the study period. Conclusion: The third-generation monolithic zirconia appears to be a good treatment option for the rehabilitation of posterior single teeth.

New fossil of Gaoloufangchaeta advances the origin of Errantia (Annelida) to the early Cambrian.

Molecular clock estimates suggest the origin of Annelida dates back to the Ediacaran period, which is in discordance with the first appearance of this taxon in the early Cambrian, as evidenced by the fossil records of stem-group and basally branching crown-group annelids. Using new material from the early Cambrian Guanshan biota (Cambrian Series 2, Stage 4), we re-interpret Gaoloufangchaeta bifurcus Zhao, Li & Selden, 2023, as the earliest known errantian annelid. Gaoloufangchaeta has a prominent anterior end bearing three pairs of putatively sensory appendages and a pair of anterior eyes; a muscular eversible pharynx with papillae is identified. The presence of enlarged parapodia with acicula-like structures and long capillary chaetae suggests a pelagic lifestyle for this taxon. Our phylogenetic analyses recover Gaoloufangchaeta within the Phyllodocida (Pleistoannelida, Errantia), extending the origin of Errantia back to the early Cambrian. Our data are in line with the hypothesis that Annelida diverged before the Cambrian and indicate both morphological and ecological diversification of annelids in the early Cambrian.

Crown Ether Electrolyte Induced Li2O2 Amorphization for Low Polarization and Long Lifespan Li-O2 batteries.

Lithium-oxygen batteries possess an extremely high theoretical energy density, rendering them a prime candidate for next-generation secondary batteries. However, they still face multiple problems such as huge charge polarization and poor cycle life, which lay a significant gap between laboratory research and commercial applications. In this work, we adapt 15-crown-5 ether (C15) as solvent to regulate the generation of discharge products in lithium-oxygen batteries. The coronal structure endows C15 with strong affinity to Li+, firmly stabilizes the intermediate LiO2 and discharge product Li2O2. Thus, the crystalline Li2O2 is amorphized into easily decomposable amorphous products. The lithium-oxygen batteries assembled with 0.5 M C15 electrolyte show an increased discharge capacity from 4.0 mAh cm-2 to 5.7 mAh cm-2 and a low charge overpotential of 0.88 V during the whole lifespan at 0.05 mA cm-2. The batteries with 1 M C15 electrolyte can cycle stably for 140 cycles. Furthermore, the amorphous characteristic of Li2O2 product is preserved when matched with redox mediators such as LiI, with the charge polarization further decreasing to 0.74 V over a cycle life of 190 cycles. This provides new possibilities for electrolyte design to promote Li2O2 amorphization and reduce charge overpotential in lithium-oxygen batteries.

A new strategy based on a cascade amplification strategy biosensor for on-site eDNA detection and outbreak warning of crown-of-thorns starfish.

Population outbreaks of the crown-of-thorns starfish (COTS) seriously threaten the sustainability of coral reef ecosystems. However, traditional ecological monitoring techniques cannot provide early warning before the outbreaks, thus preventing timely intervention. Therefore, there is an urgent need for a more accurate and faster technology to predict the outbreaks of COTS. In this work, we developed an electrochemical biosensor based on a programmed catalytic hairpin assembly (CHA) and hybridization chain reaction (HCR) cyclic amplification strategy for sensitive and selective detection of COTS environmental DNA (eDNA) in water bodies. This biosensor exhibited excellent electrochemical characteristics, including a low limit of detection (LOD = 18.4 fM), low limit of quantification (LOQ = 41.1 fM), and wide linear range (50 fM - 10 nM). The biosensing technology successfully allowed the detection of COTS eDNA in the aquarium environment, and the results also demonstrated a significant correlation between eDNA concentration and COTS number (r = 0.990; P < 0.001). The reliability and accuracy of the biosensor results have been further validated through comparison with digital droplet PCR (ddPCR). Moreover, the applicability and accuracy of the biosensor were reconfirmed in field tests at the COTS outbreak site in the South China Sea, which has shown potential application in dynamically monitoring the larvae before the COTS outbreak. Therefore, this efficient electrochemical biosensing technology offers a new solution for on-site monitoring and early warning of the COTS outbreak.

The difference in early trimester fetal growth between singletons after frozen embryo transfer and fresh embryo transfer.

BACKGROUND: Frozen embryo transfer resulted in a higher birthweight and an increased risk of macrosomia than fresh embryo transfer. However, the mechanism was still unclear. When the impact of frozen embryo transfer on fetal growth began was unknown. Crown-rump length at 11-13 weeks had been regarded as a good indicator of fetal growth in the first trimester and had been used for gestational age calculation in women with uncertain last menstrual periods. OBJECTIVE: To evaluate the association between frozen embryo transfer and early fetal growth, particularly the crown-rump length, then fresh embryo transfer. The secondary objective was to investigate the potential correlation between crown-rump length and birthweight. STUDY DESIGN: This was a retrospective cohort study conducted at the Reproductive Medical Center of Shandong University. A total of 4949 patients who obtained singleton pregnancy after frozen embryo transfer and 1793 patients who got singleton pregnancy after fresh embryo transfer between January 1, 2017 and December 31, 2022 were included. The primary outcome was the crown-rump length measured via ultrasound at 11-13 weeks gestation. The secondary outcomes were perinatal outcomes, including birthweight and the risk of large for gestational age, small for gestational age, macrosomia, low birthweight, and premature delivery. Multivariable linear regression models were used to adjust for potential confounders of crown-rump length. RESULTS: A total of 6742 live singleton births after frozen embryo transfer or fresh embryo transfer were included in this study. In the univariable analysis, the frozen embryo transfer group had a larger crown-rump length (5.75±0.53 cm vs 5.57±0.48 cm, P<.001) and an increased risk of larger-than-expected crown-rump length (13.5% vs11.2%, P=.013) than the fresh embryo transfer group. After adjusting for confounders in multivariable linear regression models, frozen embryo transfer was still associated with a larger crown-rump length (regression coefficient, 3.809 [95% confidence intervals, 3.621-3.997], P<.001). When subgrouped by fetal gender, the crown-rump length of the frozen embryo transfer group was larger than the fresh embryo transfer group in both male and female fetuses. In addition, the crown-rump length was consistently larger in the frozen embryo transfer group than the fresh embryo transfer group in subgroups of the peak estradiol levels. The comparisons among different crown-rump length groups showed that smaller-than-expected crown-rump length was associated with increased risks of small for gestational age (6.3% vs 3.0%, P<.001) and preterm delivery (9.6% vs 6.7%, P=.004) than normal crown-rump length. CONCLUSION: Frozen embryo transfer was associated with a larger crown-rump length than fresh embryo transfer, suggesting that the effect of frozen embryo transfer on fetal growth may begin in the early trimester. Suboptimal fetal growth in the first trimester may be associated with low birthweight and premature delivery.

Intraperitoneal Onlay Mesh (IPOM Plus) Repair Versus Extended-View Totally Extraperitoneal Rives-Stoppa (eTEP-RS) Repair in Primary Ventral Hernias: Experience With 50 Cases in a Tertiary Care Hospital.

Background Primary ventral hernias are abnormal protrusions of abdominal viscera through the areas of weakness in the fascia of the abdominal wall. The aim of this study was to compare the benefits and complications, and the overall outcome in the Extended-View Totally Extraperitoneal Rives-Stoppa (eTEP-RS) repair versus Intraperitoneal Onlay Mesh (IPOM Plus) repair in the management of primary ventral hernias. Methods After obtaining institutional ethical committee clearance, this prospective comparative study between IPOM Plus and eTEP-RS was conducted in a tertiary care hospital from December 2020 to January 2022. A total of 50 patients presenting with primary ventral hernias were included in the study, of whom 25 underwent IPOM Plus and 25 underwent eTEP-RS repairs. Group selection was done by simple randomization using the lottery method. Patients more than 18 years of age with primary ventral hernias presenting with a hernial defect width less than 6 cm, consenting to the study, were included in the study. Patients who did not fulfill the inclusion criteria, strangulated/obstructed hernias, recurrent/incisional hernias, connective tissue disorders, skin infections, enterocutaneous fistulas, pregnancy, morbid obesity, and parastomal hernias were exclusion factors. Results The mean intraoperative duration in the eTEP-RS group (192.3 ± 16.20 min) was significantly higher than in the IPOM Plus group (102.6 ± 16.78min, p=0.001). The mean duration of hospital stay in the IPOM Plus group (5.9 ± 2.19 days) was longer than in the eTEP-RS group (4.6 ± 3.17 days, p=0.02). The mean postoperative pain scores, from the Visual Analogue Scale (VAS), on days 1, 7, and 90 were 3.2 ± 1.11, 2.64 ± 1.11, and 1.68 ± 1.46 in the IPOM Plus group and 1.84 ± 0.688, 0.76 ± 0.66 and 0.08 ± 0.40 in the eTEP-RS group, respectively (p=0.001). Conclusion Despite being a technically easy procedure requiring less intraoperative time, IPOM Plus had several disadvantages, such as increased postoperative pain, longer duration of hospital stays, higher chances of wound site seromas, and higher rates of postoperative paralytic ileus. On the other hand, eTEP-RS was a more challenging procedure requiring more intraoperative time; however, it had several advantages: less postoperative pain, less duration of hospital stay, early recovery, and fewer chances of seromas and paralytic ileus. However, more robust data is required to compare and validate the differences between both procedures' short- and long-term outcomes.

[Brief Analysis of Clinical Evaluation Concerns of Personalized Abutments and Abutment Crown Bridge Products].

Objective: The applications of personalized abutments and abutment crown bridge products have increased year by year, but there is no clear requirement for clinical evaluation of the same variety of such products. This study mainly introduces the clinical evaluation concerns of personalized abutments and abutment crown bridge products, in order to provide reference for the declaration and registration of such products. Methods: The clinical evaluation of personalized abutments and crown bridge products are summarized, and the research content of clinical evaluation is clarified. Results: The clinical evaluation requirements that need to be considered by enterprises are introduced. Conclusion: Personalized abutment and abutment crown bridge products can refer to this study when they are launched in China, mainly using in vitro performance comparison tests for equivalence verification.

Identification and Genetic Dissection of Resistance to Red Crown Rot Disease in a Diverse Soybean Germplasm Population.

Red crown rot (RCR) disease caused by Calonectria ilicicola negatively impacts soybean yield and quality. Unfortunately, the knowledge of the genetic architecture of RCR resistance in soybeans is limited. In this study, 299 diverse soybean accessions were used to explore their genetic diversity and resistance to RCR, and to mine for candidate genes via emergence rate (ER), survival rate (SR), and disease severity (DS) by a multi-locus random-SNP-effect mixed linear model of GWAS. All accessions had brown necrotic lesions on the primary root, with five genotypes identified as resistant. Nine single-nucleotide polymorphism (SNP) markers were detected to underlie RCR response (ER, SR, and DS). Two SNPs colocalized with at least two traits to form a haplotype block which possessed nine genes. Based on their annotation and the qRT-PCR, three genes, namely Glyma.08G074600, Glyma.08G074700, and Glyma.12G043600, are suggested to modulate soybean resistance to RCR. The findings from this study could serve as the foundation for breeding RCR-tolerant soybean varieties, and the candidate genes could be validated to deepen our understanding of soybean response to RCR.